The V2 GSM is the latest innovative speech dialler from Pyronix Ltd. The speech dialler can send out alarm voice messages or SMS messages after an activation to an input, all of which are programmable. The diallers may also be used as a normal telephone if required. Boasting up to 14 inputs, 52 controllable outputs and fully duplex signalling, they are the ideal solution for customers who would like total control and monitoring of their home/work place, from anywhere in the world.

Other features include programmable inputs which can be set to activate following an input state or voltage change.

A customer 10 second voice message can be recorded per alarm input as well as a common message up to 20 seconds in length. These messages are sent together with each alarm input voice message after activation following an input alarm.

The V2GSM dialler is able to store and send a 160 string sms message for each alarm input. Automatic phone number recognition is also supported allowing the unit to control outputs following a call without having to answer the call.

The outputs on the Pyronix V2GSM can be used to control external devices such as emergency equipment, gates, vending machines, lighting and so on. The outputs can be controlled via sms message, using your phones touch tone keypad or directly from the front panel.

The remote control voice menu system allows access to the voice menu to listen in, speak in, control the status of equipment and control outputs.

The V2GSM allows full control via SMS text message. users can send SMS commands to change telephone numbers and control outputs as well as check the status of equipment and each input.

A built in speaker and microphone allows users to listen and speak into site without the need for additional equipment.

Users can use the V2GSM as a standard telephone to make outgoing voice calls.

The V2GSM can automatically forward SMS messages from the service provider to any specified phone numbers. This can be beneficial as it allows users to stay aware of service outages and low balance alerts.

The unit also has the ability to dial up to 4 telephone numbers upon alarm activation.

Main Features:

• Full duplex hands free
• Can be used as a fully operational phone
• On-board microphone and speaker
• Remote microphone and speaker outputs
• Full remote control via DTMF tones
• Output remote control
• External antenna
• Automatic Phone Number Recoginition (CLIP)
• 6 On-board programmable inputs (Expandable to 14)
• 4 On-board programmable outputs (Expandable to 52)
• 9 Destination phone numbers
• Voice/SMS messages to each input
• 256 event memory log, time and date stamped